Water Ink Flexo 250pcs / Min Top Printing Printer Gluer Inline

Top Printing Water Ink Flexo Printer Slotter Gluer Inline Automatic High Speed
 
KC-PG consists of automatic printer, automatic folder gluer and auto bundler. It features mobile units,roll to roll transfer or Vacuum transfer. Ink and energy saving function,touch screen and PLC setup.Automatic lubrication system keeps lubricant of all units at the same level.
Intervals adjusted by manual OR PLC and touch screen,Quick save-start order funciton design.
Suitable for corrugated cardboard.
 

Technologic parameter

Model	KC-PG920	KC-PG1224
Max working speed	250pcs/min	200pcs/min
Max feeding size	900*2100mm	1200*2500mm
Max skipping feeding size	1100*2100mm	1400*2500mm
Min feeding size	300*650mm	350*720mm
Max printing size	880*2000mm	1150*2400mm
Cardboard thickness	2-11mm	2-11mm
Register	+/-0.5mm	+/-0.5mm
Slotting precise	+/-1.5mm	+/-1.5mm
Die cutting precise	+/-1.5mm	+/-1.5mm
Max slotting depth	210mm	285mm
Slotting interval	260*75*260*75mm	270*85*270*85mm
Gluer speed	Sychronized with printer	Sychronized with printer
Bundling speed	15-20bundles/min	15-20bundles/min

 
 
1 Feeding unit

1,Machine clutch

1)Electric machine control clutch bell , moving last warning bell ring , ensuring the safety of operation personnel.

2)Drive shaft with a safe clutch to avoid misuse and damage to the machine (the machine is not fixed, the host can not start operation).

3)Pneumatic interlocking device .

4) Host motor start up protection device .

2, Adsorption leading edge Feeder system

1)lead edge feeder institution can greatly reduce clogging phenomenon in the process of cardboard paper.

2)Suction fan auxiliary feeder,make sure the winding paperboard feeding smoothly,The wind volume can be adjusted according to the size of the board.,The maximum guarantee of the vacuum adsorption of cardboard, so that more accurate to send paper.

3)front baffle and back baffle adopt manual adjust gap, feeder lift-right baffle adopt electric adjust gap.

4)feeder wheels adopt polyurethane material made,Large friction and long life.

5)it suitable for 3layers,5layers and 7layers corrugated cardboard, include E flute cardboard.

6)supply paperboard counter,set-up and Display production quantity.

3,dust-extraction unit

1)Equipped with dust removal mechanism ( remove dust brush ), effectively remove cardboard surface impurities , improve the quality of printing .

4,feeding roll

1)Seamless steel pipe , parcel wear-resisting rubber , correction and balance

2)Lower feed roller chrome plating.

3)feeder Paper roll gap dial manual adjustment, adjustment range 0-11mm.

5,Operation control switch (PLC computer control)

1) the control panel is equipped with 10 Inch Touch screen, can control the paper feeding, printing, slotting, die cutting, easy to operate.

6,Automatic zero return device

1)Paper feed, printing, slotting, cutting part of the electric automatic return to zero.

2) In general, the use of automatic paper box to zero device, try to print two can be adjusted to the correct position, reduce waste.

2 Printing unit

1,printing roller

1),Steel plate material, surface grinding, hard chromium plating.

2),Balance correction, smooth operation.

3),Fixed ratchet wheel shaft.

4),Full format plate ditch, suitable for 9mm hanging version.

5),Loading and unloading printing plate, pedal switch electric control positive and negative.

6),Printing roller clearance dial manual adjustment, adjust the range of 0-11mm.

2,printing pressure roller

1),Steel pipe surface grinding, hard chromium plating.

2),Balance correction, smooth operation.

3),printing pressure roller gap dial manual adjustment,adjustment range 0-12mm.

4),Feeder roller gap dial manual adjustment, adjustment range is 0-12mm.

3,Metal anilox roller

1),Steel pipe surface using advanced electroplating hard chromium technology, hard, smooth and wear-resistant.

2),Dot uniform, uniform on ink.

3),Prolong the service life of the plate and rubber roller.

4),anilox roller gap dial manual adjustment.

4,rubber roller.

1),Steel pipe surface coated with wear-resistant rubber.

2),High special grinding rubber roller, ink effect is good.

5,feeder paper up-down roller

1),up roller:Seamless steel pipe, with 2 paper feed wheel.

2),down roller:out diameter is 155mm Seamless steel pipe, surface grinding, hard chromium plating.

3),feeder roller gap dial manual adjustment,adjustment range is 0-12mm.

6, phase adjustment mechanism

1)planetary gear structure.

2)horizontal position, manually adjust the distance of a total of 10mm.

3)the printing plate roller adopts frequency converter to adjust the phase, return to zero and adjust the speed of the plate, adjust the version of high precision.

7,Ink circulation

1),Pneumatic diaphragm pump for ink stability, simple operation and maintenance.

2),Ink filter, filter impurities.

8,Printing phase fixing device

1),Pneumatic brake mechanism.

2),When the stage is separated or adjusted, the brake mechanism is restricted to rotate, and the fixed point of the original gear position is maintained.

 
3 Slotting unit

 

1, planetary wheel phase adjustment, positive and negative 360 degrees electric operation adjustment.

2, Carton length width height adjustment by computer control.

3, The front knife position to the automatic zero, zero after the linkage of the seat before the axial displacement.

4, When the Back knife Circumferential movement independently, to adjust the height of the carton, box high electric adjustment.

5, Linkage plates are made by Machining center

6, the linkage plate sliding has the diameter of 100mm linear slide way, less resistance, precise movement.

7, The upper and lower screw rod synchronous transmission adopts spiral gears, and the transmission is reliable and convenient to be installed, which can eliminate the gap and drive accurately.

8, The gap between the upper and lower cutter wheel sets of the slotting part can be adjusted by the cutting condition of the corner cutter group.

9, Three shaft type structure, line two, pre-loading, line pressure, ensure pressing effect.

10, elastic angle knife, five layer three layer need not adjust.

11, pneumatic disc brake device.

12, the wear compensation design of the cutter head is drawn out, and the life of the copper block is prolonged.

13, the whole point moving, convenient for changing the knife.

14, reloading, pressing shaft, high-quality steel, ensure rigidity. The roll body chrome grinding, prolong the service life

15, the creasing wheels adopt Replaceable structure, and chrome plated

16, Creasing line pressure regulator for electric adjustment, touch screen display value.

17, slotting creasing down wheel, high quality steel production, to ensure the rigidity of the axle. The roller body chrome grinding, prolong the service life.

18, use key free connection.

19, Button to control the slotted cutter positive and negative operation, and can automatically maintain the phase, stop and running state can be achieved under the slotting phase adjustment

20, slotted creasing each cutter longitudinal movement location and the box dimensions are controlled by PLC, operation panel installed touch screen, input box slot size automatically adjusting the layout.

21, copper cutting knife.

 
 
5 Folder gluer

1,Wind pressure assisted cardboard fall, front pat cardboard trim, let the cartons level.

2,Stacker the blocking electric adjusted, make the cartons stack centring.

3,Front and back blocking for electric displacement.

4,Every folding carton number from 10 to 40 can be set automatically.

5,Paperboard lifting roller device, follow-up paperboard insert at the bottom,

stack paper easily.

6,Pressure paper electric adjust the height.