Water Ink Printer Slotter Die Cutter / Corrugated Board Printing Machine

Automatic Water Ink Flexo Printer Folder Gluer Inline for Corrugated Carton Box Making​
 
KC-PG Automatic Flexo Printer Folder Gluer Inline consists of automatic printer, slotter,die cutter automatic folder gluer and auto bundler. All the functions are adjusted by touch screen control, easy to operate.It features mobile units,roll to roll transfer or Vacuum transfer. Doctor blade chamber or rubber roller ink distributioin for option. Ink and energy saving function,touch screen and PLC setup.Automatic ink washing system.
Intervals adjusted by manual OR PLC and touch screen,Quick save-start order funciton design.
Very suitable for corrugated carton box making commpanies.
 

Technologic parameter

 
 
1 Feeding unit
1) Continuous or skip feeding is available
2) Lead edge feeder with roller(Mechnical feeding or servo feeding for opiton)
3) Feeding wheel are wearable and with long service life
4) Flap structure installed on one the side of baffle
5) Vacuum air flow and pressure can be adjusted to matched different size of cardboard
6) Vacuum sheet cleaner with two rows of dedust brush remove the dust from printing suraface of the cardboard.
 
2 Printing unit
 
1) Top printing
2) roll to roll sheet transfer or vacuum transfer for option
3) All the rollers undergoes balance treatment, grinded surface,plated with rigid chrome.
4) Registering +/-0.5mm
5) Doctor blade chamberor rubber roller ink distribution for option
6) Ink shortage alarming system
7) Automatic ink washing system
8) Automtic restoration after cleaning printing plate
9) Quick-move feeding wheel adopted
 
3 Slotting unit 
1) Single shaft with two slotting knives,carton height adjusted by inner gear instructure to avoid lubricate oil staining on cardboard
2) Double shaft for option
2)Slotting holder can move along linear guides driven by lead screw for more flexible and pecise movement.
3) 9CrSi or SKD slotting knife for option
4) Glue tab cutting knife with spring,cut 5 ply and 7 ply cardboard without adjustment, very convenient.
5) Pre-creaser and creaser minimize score cracking and promote better folding accuracy
6) Slotting holder are cast steel avoid the slotting knife damaged when running
7) Hand hold-puching dies for option.
 
4 Die cutting uint
 
1) Side to side oscillation of anvil drum(50mm)
2) Anvil trimming device keep surface of anvil cover flat and smooth.Anvil drum speed can be controlled to keep carton and die cutting plate indentical
3) Anvil cover has Maxdura,Depak and CUE for option
4) Independent motor drives compensates speed of anvil drum at range of +/-3mm when printing of normal carton is performed
5) Can install 4 more knives for slotting(optional)
 
 
5 Folding and gluing unit
 

Gluing part

1) Glue spray system with automatic trace by optical eye

2) Save glue,no glue leak, easy to maintain.

Folding part

1) The cardboard conveyed by upper and down belt

3) The press wheel at cardboard feeding section drives by spring, the gap between the press wheel and down folding plate can be adjusted by position limit.

4) The back section convey by vaccum suction, the bottom folding belt speed is higher than vaccum suction belt to avoid the scissor mouth.

5) There are rectification wheel at the both sides to make the carton folded precisely

6) The folding plate horizontal move adjusted by electric control

Counting and output unit

1) Photoelectric switch counts precisely

2) Two servos adopted to realise the precise counting and output

3) Strong air pressure to prevent the carton wrapping when output, air outlet can adjusted

4) Back baffle can be adjusted by electric controll

 
6 Bundling unit
 

1) Connected with gluer , collect and convey the carton smoothly

2) flap interval can be adjusted as per the carton size

3) PP string bundling automaitcally
4) Photoelectric detection strapping position